PVC Pipe Extrusion Machinery
1)This pipe extrusion machinery mainly includes:
Extruder, mould, vacuum calibration tank, spray cooling tank, haul-off, cutter, stacker.
2)The
pvc pipe extrusion machinery is used for water supply, drainage, air transfering, construction, etc
3)Their wall thickness is different according to different pressure standard
4)The
screw structure designed specially for the PVC power.
5)This pipe extrusion machinery mainly using in manufacture of
Water supply and
drainage pipelines
in building, the
plastic PVC constructional plumbing, cable laying ect.
6)This pvc pipe extrusion
machinery using the PLC controled system, AC/DC motor, ABB speed gonervor, SIMENS contacter, Japanese RKC temperature controller.
7) Choose the type of haul-off units according to different demands:two claws ,three claws, four claws, six claws, etc.
8)Choose the type of cutter according to different pvc pipe diameters scope ,e.g. circular saw cutter, annular cutting ,
Competitive Advantage:
1. Excellent in chemical corrosion, no rust;
2. With self extinguishing and flame retardant;
3. Excellent in anti aging, can be used 20years to 50 years between the temperature from subzero 15 to 60 degrees Celsius;
4. Wall is smooth, inner wall surface tension, it is difficult to form scale, the fluid transport capacity of 43.7% higher than the cast iron pipe;
5. The weight is light, easy to flaring, bonding, bending, welding, pipe installation workload is only
1 / 2 to the steel pipes, low labor intensity, short duration;
6. Good electrical properties of resistance, volume resistance of 1 to 3 x 105Ω.cm, breakdown voltage 23 to 2kv/mm;
7. The toughness of PVC pipe is low, linear expansion coefficient is high, operating temperature range is narrow.
Technical parameter:
Type | SD-160 | SD-250 | SD-400 | SD-630 |
Productive tubing scope(mm) | 63-160 | 110-250 | 200-400 | 400-630 |
| 6000 | 6000 | 6000 | 6000 |
Traction speed(m/min) | 1-16 | 0.4-7 | 0.1-2 | 0.1-2 |
Cutting method | Circular Saw Blade | Annular cutting | Annular cutting | Annular cutting |
Total power(kw) | 85 | 120 | 155 | 200 |
| 25 | 30 | 35 | 48 |
